Unifi floating mount 17cm for Cloud Gateway Max
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3d printed magnetic or wall mounted mount for the Unifi Cloud Gateway Max, Cloud Gateway Ultra, and Gateway Max.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 78
- Makes
- 1
- Views
- 746
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
A diy version of the Ubiquity floating mount 17cm for compact gateways.
Required
60x10x3mm bar magnets x5
M3 or M4 countersunk screw x4
In the slicer add a pause at the 3.6mm layer height or layer 18 if using 0.2mm layers. The layer right before the pockets are bridged over.
Insert the bar magnets
Holds well magnetically to steel surfaces
I used ABS filament but any should work just as well. Adding some strips of masking or painters tape to both sides will increase the grip level on smooth surfaces if needed to stop the floating mount sliding or the gateway sliding on the mount. Idealy the mount would have some feet made of softer material like TPU. If anyone would like a version like that just leave a comment and I'll work on it.
Bar Magnets
https://www.aliexpress.com/item/1005010227139663.html
These are just an example, it may pay to search for cheaper depending on your own region.