Spacer for non woven masks
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.36 – €0.44 net (excluding VAT)
For file: non_woven_mask_spacer_short_0.15mm_PETG_MK3S_35m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.40 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 35.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Use it in a fold to create a space between the non-woven masks and the lower part of the nose.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Use it in a fold to create a space between the non-woven masks and the lower part of the nose.
The thin thread that can be made in the vent hole after the print disappears by adding instantaneous heating to the thread with Lighter.
When using Lighter, be careful of the handling of fire or too hot.
The printer is MK3S+, the plate is Textured Powder-coated Print Sheet, and
the filament is Prusament PETG.