1 / 4
19mm Pipe Clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clip to mount a 19mm pipe/tube with a 8g or 10g countersunk screw
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 63
- Makes
- 0
- Views
- 116
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
Made to mount my watering shower heads instead of leaving them lying around.
I printed 4 in ESUN Grey PETG with 100% infill and no supports. will see how the prints hold up over time
the mounting hole is a 4.4mm hole with a 1.8mm countersunk chamfer. if you're using 8g screws this should fit in. I used 10g as it was what I had on hand. I set my drill in reverse and reamed the hole till I had a slip fit.
all 4 mounted perfectly with no splits using an impact driver set to the lowest setting