PC4-M6 PTFE Fitting Nut for Creality Filament Dry Box 2.0
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom M6 nut to mount a PC4-M6 pneumatic fitting in the filament feed port of the Creality Filament Dry Box 2.0.
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 234
- Makes
- 1
- Views
- 934
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
The Creality Filament Dry Box 2.0 has a filament feed port in the back of its lid. It comes with a rubber grommet, which works fine for feeding out the filament bare, but doesn't hold on to a PTFE filament tube very well.
This model is a custom M6 nut which fits neatly in the 8mm hole in the lid with the rubber grommet removed. It allows you to mount a standard PC4-M6 pneumatic fitting in the hole to securely hold a PTFE tube. The back side of the nut has a smaller hole to keep the filament clear of any sharp corner on the back of the metal fitting.
There's also a washer which can go between the fitting and the outside of the lid if your fitting doesn't sit neatly against the outside of the lid.
I printed these in Bambu PETG HF Black on a Bambu P1S on the Textured Cool Plate using the default “0.08mm High Quality @BBLX1C” profile in OrcaSlicer with 100% infill and random seam position. For the washer I used the concentric pattern for the top and bottom surface.