1 / 1
Modular 10 Inch Server Rack - Reworked - 220 x 200 Bed Remixes
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This remix project is to remix the Modular 10 Inch Server Rack - Reworked pieces, as needed, to fit on a 220 x 220 bed.
- Rating
- 5 / 5
- Likes
- 56
- Downloads
- 698
- Makes
- 4
- Views
- 2,652
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Cross Brace:
- There are three STLs for your use: cross brace with cut area; cross brace pre-cut right side; cross brace pre-cut left side.
- I moved the fan mount location to the corner, rather than the middle. This allowed for the addition of a cut area.
- The resulting pieces can either be cut in your slicers with connectors added, and then glued. Alternatively, on the pre-cut pieces four holes that can be used for bolting. Holes are sized for M4 or #8 screws.
- I've also added a “pin” that can be used to align the pieces of you don't want to bolt it.