Farkle points counter
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.21 – €5.15 net (excluding VAT)
For file: Points counter_0.2mm_PLA_MK3S_5h2m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.68 excluding VAT (range midpoint).
- Weight reported by the author
- 51 g
- Print time reported by the author
- 5.04 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A rotating score counter not only for dice games like Farkle. Increments are 50 points, range from 0 to 10,000 points.
- Rating
- 4.5 / 5
- Likes
- 14
- Downloads
- 36
- Makes
- 2
- Views
- 461
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A rotating score counter not only for dice games like Farkle. Increments are 50 points, range from 0 to 10,000 points. The assembly used 3x compression springs with a diameter of 7mm and a length of approximately 11.5mm and 3x steel balls with a diameter of 8mm (used from a rolling bearing). After printing, the holes for the springs and balls need to be cleaned with a drill or reamer with a diameter of 8mm to ensure free placement. For this operation, three holes are printed in Tělo 1. Assembly according to the instructions. The lid can be secured with superglue at the end of the assembly.