1 / 4
Calibration Tool - CaliBox of horrors — image 1
1 / 4

Calibration Tool - CaliBox of horrors

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Model used for a multitude of calibrations.

Rating
5 / 5
Likes
3
Downloads
33
Makes
3
Views
229
Reviews
3

Updated at source:

Model information

Category
Test Models
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

This is my go-to calibration print for checking everything at once. 

After some testing with friends, I realized I needed to share this model, as it is really fun and challenging to print. 

If you want to test your profiles and printer then this is the Test for you. 


This Calibration Print tests the following
 

  • Curves (wall and top curves) - Orange
  • Pressure Advance  (corners) - Pink
  • OverHangs - Green
  • Top Surface - Light Blue
  • Bridges - Purple
  • Arches -  Red
  • Bed Adhesion - No color needed
  • Cooling - Dark Blue.
  • Dimensional - Yellow
     


Bridges - 1mm thick in x,y, and both diagonal directions to test your cooling and bridging from all angles

Cooling - For ABS less cooling stops curling on the tips. PLA and PetG will need more cooling to fix the curling up.

Dimensional - the Base block is 20x20mm and the top notches (yellow) are 40x40mm



 Recommended settings

  • 3 walls
  • 0.2 layer height
  • 0.4 - 0.5 wall thickness
  • 5 top layers
  • 4 bot layers 

 

 

 

 

Tags