Piper Aircraft Drop-in Pencil & AA Battery Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remove your old Piper ash tray and drop in a battery, pencil, & pen holder! Fits many PA28, PA32, and PA34 aircraft.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 28
- Makes
- 0
- Views
- 173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a place to keep my mechanical pencils at the ready. I designed this drop-in ash tray replacement to hold 2 AA batteries, 3 mini mechanical pencils, and a couple gel pens.
I ordered the half length pencils from Amazon: https://a.co/d/hqRgqSP . They don't interfere with moving the yoke, so they're perfect.
To use, simply pull out the old ash tray box (clean out the old gum wrappers) and snap the pen holder in place. Should be compatible with most variants of PA-28, PA-32, and PA-34; maybe a few others. If you have a Piper ash tray, compare the measurements with the image I included.
Printing:
I used PLA+. It'll be interesting to see how it holds up in the summer with 110F+ hangar temps. If it distorts, I'll try printing with ABS or PETG.
Designed for .20 layer height, no supports. Use a brim if you have adhesion issues. 20% infill is plenty.
Designed with Fusion 360. I included the .f3d file if you'd like to customize it.