1 / 2
Anthony Bourdain Hueforge Middle Finger
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Public Domain
You do not need a multicolor printer to print a hueforge, follow the directions below:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Add pauses in your slicer at the layers below and swap colors:
Swap Instructions:
Start with Charcoal Black
At layer #6 (0.56mm) swap to Natural
At layer #11 (0.96mm) swap to Grey
At layer #12 (1.04mm) swap to White for the rest