GEN2 quad-wide, half-height (slim), standard depth open shelf
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A quad-wide (13 15/16", 354mm) slim, open shelf for storing flat stuff in your GEN2 ecosystem. Prints in two parts.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 25
- Makes
- 0
- Views
- 113
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed GEN2 compatible thin, wide light-duty shelving to hold sheet goods so I modified Jerrari's GEN2-QL Slim Case - Quad - Standard to meet those needs.
These use a strap piece to attach the two halves of the quad-wide shelf. This reduces your attachment options below the shelves.
These do work with optional GEN2 Drawer Stopper(s). (re-read note above this)
You'll likely want to print at least 2 QL spring latches (one L, one R) out of PETG to help secure these shelves into your GEN2 solution. These can be found on any GEN2-QL (search Printables for “GEN2-QL”) model under the “GEN2 QuickLock Mechanism” folder.
These shelves are light-duty, they shouldn't be loaded down with heavy loads.
The strap should be a tight fit between the two pieces. I had to use light hammer taps to overcome friction. Can optionally be glued together by gluing the strap in place.
I use mine to hold extra plastic record sleeves, other flat sheet supplies, and the sleeve from the “now playing" record album I'm listening to. I needed support deeper than the GEN2 Standard depth, so I also modified a GEN2-QL Slim Case - Quad - Short into a quad-wide, slim shelf to add depth. I'll publish this in the near future.