1 / 3
Portal - Level Warning Plaques REMIX (Magnets)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The frame for the portal plaques with holes for 6x2 OR 10x3 magnets.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
6mm x 2mm or 10mm x 3mm magnet holes. You can mix and match if you want. I found the 6x2 perfectly strong enough but I also have lots of 10x3 so I added those (very strong).
They press-fit for me, but your mileage will vary. The 6x2 holes are 6.2mm in diameter but the 10x3 holes are 10.15mm in diameter.