1 / 1
RC Tank T-34 PS. 231-1 Part 7 main gearbox — image 1

RC Tank T-34 PS. 231-1 Part 7 main gearbox

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

RC Tank T-34 PS. 231-1 Part 7 main gearbox

Rating
0 / 5
Likes
39
Downloads
372
Makes
0
Views
2,396
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

https://youtube.com/playlist?list=PLcrufmroGYFnFEDnIxH_HovsyGvH1X6Ub

Please make part number 1 “Traks" first because it is the most challenging assembly. https://www.prusaprinters.org/prints/99893-rc-tank-t-34-ps-231-1-tracks

 

FuseGear is the part that explodes when, for example, a rock enters between the track and the wheel at full throttle. So it's a good idea to print a spare part.

There are two types of motor shafts. Completely round and wiht flat. Wiht flat is better. Part “SteeringMotorGearR” is for round shaft and “SteeringMotorGearF” is for partially flat shaft.

 

You also need 

-MF105zz        7pcs

-MF85zz          3pcs

-5mm shaft 24mm  1pcs   

-5mm shaft 33mm  2pcs

-5mm shaft 60mm  1pcs

-5mm shaft 86mm  1pcs

-M3 x 10mm screws  10 pcs

-M3 x 24mm screws   2pcs

-M3 x 20mm screws   2pcs

-2030 size brushless motor 4800 - 5200kv  Note. The motor controller must have crawler mode. You don’t want to brake when you turn the other way.

 

 

 

The project is not 100% complete. 

Because of the Covid-19, I haven’t been able to print to school printers. Please donate to me and I'll buy my mk3s printer and finish the project.

The print settings are based on my memory images and may not be correct.