Life's Not Fair
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sign with Stand
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 0
- Views
- 55
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You can download the stand here.
https://www.printables.com/model/1063406-sign-stand
Printer Settings
PrusaSlicer 2.9
Layer Height - .2
Perimeters – 2
Minimum Shell Thickness Top and Bottom – 2mm
Top Fill Pattern – Monotonic Lines
Bottom Fill Pattern – Monotonic
Skirt – 0
Brim – Inner brim only (Signs with Hangers)
Fill Angle - 90
Seam Position – I use Aligned on the Wipe Cylinder and signs with hangers. On the signs without a hanger I paint the Seam on the bottom in the middle.
Wipe Cylinder
Height Range Modifier
- Start Height - 0.2
- Stop Height - 2.2
- Layer Height - 0.2
Add Settings – Infill – Fill Density - 0%
Layers and Perimeters
- Top and Bottom 0
- Perimeters 1
Make sure the Wipe Cylinder prints first.
Signs
Height Range Modifier
- Start Height – 2
- Stop Height – 2.8
- Layer Height - 0.2
Add Settings – Infill – Fill Angle – 0
Add Settings - Layers and Perimeters – Single perimeter on top surfaces – All top surfaces
Color change at 2.2mm
If you don’t like my settings and you have better ones let me know. I’m always look for better ways to print things.
If you have any questions, just ask.
Please post pictures!!!
Filament used in the pictures
Prusa PLA Marble Grey and Galaxy Black