Ares Death Racer Head
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A custom head for your Death Racer by CM Designs
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 37
- Makes
- 0
- Views
- 159
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This is a remix of CM Design's awesome Ares Death Racer head. I've modified his original design to accept a bolt through the neck mechanism into the helmet.
The original design was intended to be glued together but these Death Racer heads tend to take a beating, so I remixed this design to bolt together with one m3x20mm countersunk bolt. Now, if your NeckMech snaps, you won't need to reprint the entire helmet! I also thinned out the plume key to make gluing the plume together a bit easier.
If you haven't built a Death Racer and started battling yet, files and instructions are available here on Printables and on Michael Baddeley | Creating 3d printer designs | Patreon
Huge thank you to Protopasta and CM Design for helping me get these Death Racers together! Check out the Deathracers Builders Group | Facebook page for more information on making your own!
All parts oriented for printing, no supports required.