Bolted-On Extrusion Filament Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is yet another filament holder, but one meant to be bolted onto 20x20mm extrusion.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is yet another filament holder, but one meant to be bolted onto 20x20 extrusion or the 20mm side of 20x40 extrusion. It's very similar to my TEVO Tornado / 20x20 filament holder that clicks into place instead of using a bolt: (https://www.thingiverse.com/thing:3178835)
For this filament holder, print with it placed on it's back with supports at a 15 degree overhand threshold and with a 1cm brim for best results. I also included a test piece to see if the filament holder will fit on your printer.
Parts You Need: -5mm diameter, 16mm long screw -T-nut
Happy printing!
Category: 3D Printer Accessories