BTT HBB Keys
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
my own set of keys made for the btt hbb keypad
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 54
- Makes
- 0
- Views
- 350
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
These are my own set of keys which I modeled for my Voron Trident's Bigtreetech HBB macro keypad
My personal use for each one is as follows:
- home all axes
- maintenance mode (printer lowers bed to the bottom and brings toolhead to the front, usually done for nozzle swaps
- home xy axes
- turn on/off chamber lights
- pause/resume print
- disable motors
- switch from single color mode to mmu using ercf. This is very specific to my printer but it could be used to disable ercf or similar
Printing
print in the material of your choice, each key is composed of three parts: black shell, front design, and switch attachment. Print them as a single piece making sure to use a transparent filament if you want light to shine through them.
Split each key using the split to parts button on your slicer
I found the buttons to be a bit difficult to insert in the btt hbb switches, I used a standalone switch I had laying around for pushing the key in and better create the space needed. My designs started from the btt supplied template so it may not be an issue for you
Skirt case
wondering where the skirt adapter shown in the picture comes from? It's my own design you can find here