1 / 12
MOSFET Module Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for 3D Printer MOSFET modules.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 36
- Makes
- 0
- Views
- 179
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
A case for 3D Printer MOSFET modules with board size 60x50 mm and hole spacing 42x52 mm.
The MOSFET board is sandwiched between the Top and Base pats of the case.
4x M3 10mm flat head screws are needed for assembling.
The base comes in 3 versions:
- Base – no mounting holes
- Base mount_v – with two vertical mount holes, 3 mm diameter, spacing 80 mm
- Base mount_h - with two horizontal mounting holes, 3mm diameter, spacing 70 mm
For heated print bed or hot end control, in most cases it seems to work fine without active cooling. Placing the box in a well ventilated position could be enough. If a fan is needed, it can be mounted with zip ties on top of the box.
Print material recommendation: PETG, PCTG, ABS or any other high heat resistant filament.