Cubicle Coat Catch_._Hanger Extraordinaire_
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a complicated approach to a simple problem; meaning that I WAY overengineered this coat hanger.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 52
- Makes
- 1
- Views
- 156
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a complicated approach to a simple problem; meaning that I WAY overengineered this coat hanger.
I designed this and printed many of them for most of the department at my previous job. It's incredibly strong; I could literally hang on it! The way it snaps into place is super satisfying too.
Key Features:
- Hooks have claws to grip jackets that are missing the hanger loop:
- Triple spine minimizes material while making it stiff and springy:
- Designed with sweeping gussets to eliminate the need for support material:
- Cap lip fingers on each side to grip under cubicle cap:
- Coped to contour: (GIF also shows cap lip fingers)
- Groove lock - Locks into groove at cubicle wall end: (versions with and without groove lock are available)
- No supports needed.
Plate 1: “Laterally Repositionable” __ Hangers on BOTH sides of cubicle wall - It clips on and can be repositioned side to side.
Plate 2: “Laterally Repositionable - HALF” __ Hangers on ONE side of cubicle wall - It clips on and can be repositioned side to side.
Plate 3: “Locked in Groove” __ Hangers on BOTH sides of cubicle wall - Locks into groove at the end of the cubicle wall.
Plate 4: “Locked in Groove - HALF” __ Hangers on ONE side of cubicle wall - Locks into groove at the end of the cubicle wall.
Feedback is welcome.
ENJOY!
Check out https://makerworld.com/en/@o.__ACe__.o for my better models!