1 / 2
Drill Index Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable two-part case for Drill Index cards.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 314
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Case to hold Drill Index cards, or any other cards with similar dimensions (2.875" x 4.875"/ 73mm x 102mm). This was designed to have the ‘drawer’ reversible in any orientation as you can see in the photos. There are also card holders built in so you can easily refer to a card while your hands are occupied. The small detent allows the case to be securely closed and tossed into a range bag, pickup bed, or wherever you want.
- Highly recommend adding fuzzy skin to give the case a bit more texture/grip.
- Stick with a .4mm nozzle to preserve the card holder slots
- Any layer height from .3mm or smaller will work well--the slides start getting a bit rough with anything larger.
- Print orientation: For the upper portion, I had the most luck printing on the edge, but you can certainly orient the ‘DRILL INDEX’ letters against the print bed and bridge.