1 / 2
Paw Patrol Duplo Slide / Duplo skluzavka Tlapková patrola — image 1
1 / 2

Paw Patrol Duplo Slide / Duplo skluzavka Tlapková patrola

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Modular slide compatible with Duplo (Mega Bloks) for Paw Patrol figures. / Modulární skluzavka kompatibilní s Duplo.

Rating
0 / 5
Likes
8
Downloads
63
Makes
0
Views
351
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Print at 0.2mm layers. Support settings: Overhang angle 30°, style: Grid with support spacing tested from 4.5 to 6.0 mm. I recommend setting supports so they are not significantly wider than the model itself, which saves filament and print time. Printed with PET-G, but can also be printed with PLA.

Tisk na vrstvu 0,2 mm. Nastavení podpory: Mezní úhel 30°, styl: Mřížka s roztečí podpěr testováno 4,5 až 6,0 mm. Doporučuji nastavit podpory tak, aby nebyly výrazně širší než samotný model, což šetří filament i tiskový čas. Tisknuto z PET-G, ale je možné tisknout i z PLA.

Tags