(FINALLY!) Working Kobra 3 profile for Prusa Slicer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Kobra 3 profile for Prusa Slicer.
- Rating
- 0 / 5
- Likes
- 32
- Downloads
- 620
- Makes
- 0
- Views
- 2,350
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
=>This is a Kobra 3 Combo profile for Prusa Slicer.
Finally.
I made it mainly for non-planar printing and Arc Overhangs enthusiasts because my Kobra 3 did not support non-planar 3D printing at the moment. I could have charged for it, but that would have been a pain, so I preferred to do it for free for you.
=>I also include a classic non-planar test and a non-planar test for the Kobra 3 (it is flattened to avoid collisions and cut to avoid collision with the purge magnet).
=>KNOWN BUGS in the Prusa Slicer non-planar slicer:
-When you change any parameter that has to do with non-planar layers, RESTART the slicer. Otherwise, it will simply generate a plate on top without twisting it to make the non-planar trajectories.
-If you modify the model, resize it, change the colors, etc., please export the board as STL (and especially not OBJ), delete the current model and reimport your exported model. It's stupid, but it works.
This profile is obviously also suitable for the normal version of Prusa Slicer.
Of course, it would have been stupid to provide you with these explanations without the slicer link. So here is the direct download link:
=>Download NON PLANAR slicer HERE<=
