1 / 2
CAMLOCK Adapter for Fein Hoses (45mm)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an adapter designed to fit the Fein vacuum hoses that come standard with the Turbo dust extractors
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 77
- Makes
- 0
- Views
- 391
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an adapter designed to fit the Fein vacuum hoses that come standard with the Turbo dust extractors.
Compared to the original fitting, it is sized for the 45mm diameter hose fitting and shortened.
Printed at 0.2 with 25% infill and 6 wall loops for strength. Print with the thread side up. Inner brim if you think it needs it.
To use, just remove the Fein fitting and push on. Should be a snug fit.
You'll need to print the camlock fitting too.