Shock Absorber Squashball feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shock Absorber Feet with 2 yellow Dot Squash Ball 15mm taller than original design
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 18
- Makes
- 0
- Views
- 156
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Shock Absorber Feet with 2 yellow Dot Squash Ball.
I have been using this design for years on the bottom of my Prusa/Pulse, but I needed them a little taller for room underneath the printer. These should fit just about any printer out there, depending on the weight and you can use more than just 4 if needed.
The model has been redesigned to be as similar to the original as possible. It is low poly, so it should print pretty quickly.
Printed in ASA, 0.2LH, 30% 3D Honeycomb, 4 walls, no supports needed
pla, petg, abs, Nylon would work equally well except I am in a heated chamber so ASA is a better fit for me.
Use two dot balls, they are the hardest. Or print your own ball using TPU. I get about 2 years out of the balls before they go flat. Once flat, you will lose about 10-12mm in build height, hence the reason I am extending these upwards.
You can purchase these balls here
Please leave a “Like” Thanks for downloading
Thank you Maxter3D for your original design