A4 Photo Frame
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.53 – €5.54 net (excluding VAT)
For file: a4photoframe-coreone_0.4n_0.3mm_PLA_COREONE_2h44m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.03 excluding VAT (range midpoint).
- Weight reported by the author
- 111 g
- Print time reported by the author
- 2.73 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Photo frame for A4 sized prints. Mount on wall or stand on table. Printable on MINI.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 97
- Makes
- 1
- Views
- 857
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple photo frame for A4 prints (210 x 297 mm). Can be hung on a wall or stand on a table.
The frame is a tiny bit smaller than A4 for a sharp look, frame is only visible from the side.
Can be printed on a MINI build plate by rotating the long parts diagonally and printing them one by one. All parts can be printed in one go on MK4 or similar larger printers.
The parts are pressed together using 4 clips. The optional legs snap into the larger slots from the back, both vertical or horizontal orientation possible. Use two legs for stability.
Use blue-tack or similar to stick the photo on the frame. There are slots for hanging on a nail on the wall or just use blue-tack again.