1 / 2
Pop'n Music Controller Full Size
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Full size arcade control of Konami bemani game.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 47
- Makes
- 0
- Views
- 628
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution
This is a full size Pop'n Music controller.
I designed the controller to accommodate an Arduino Leonardo.
Connected to a Type D connector.
But you can also use a generic zero delay controller.
The controller consists of the following parts:
- 1 x Left
- 1 x Up left
- 5 x Center
- 1 x Up right
- 1 x Right
- 2 x Large hatch
- 7 x Hatch
To build it you will need:
- 1,65 Kg of filament
- 1 x Arduino Leonardo
- 1 x Cable Male to Micro USB
- 1 x Type D connector
- 1 x Cable USB Type A/Male to A/Male
- 9 x 10 cm ( 4 inches ) Arcade buttom ( 2 X white, 2 x Yellow, 2 x green, 2 X ble, 1 x red )
- 18 x 6,3mm ( 0.250in ) Crimp connectors to L
- 18 x 4,8mm ( 0.187in ) Crimp connectors
- 57 x M3x10mm Screws
- 48 x M3 Nuts
- 9 x Heat-set inserts
- Wire various colors