Miniature Photographer/Tourist II for your Diorama
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.98 – €1.20 net (excluding VAT)
For file: photgrapher-walking_0.4n_0.1mm_PLA_MINIIS_1h33m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.09 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 1.55 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Miniature photographer for your diorama, architectural miniature or as a figurine.
- Rating
- 0 / 5
- Likes
- 49
- Downloads
- 392
- Makes
- 0
- Views
- 775
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Characters & Monsters
- License
- Creative Commons — Attribution — NoDerivatives
Miniature photographer for your diorama, architectural miniature or as a figurine.
Man | Photographer | Tourist | Architectural figurines | People
The photographer is suitable for 3D models of nature, city or as a tourist.
Printable for the most common scales (with photographer height 185 cm):
- 1/12 scale: 154.2 mm
- 1/24 scale: 77.1 mm
- 1/35 scale: 52.9 mm
- 1/48 scale: 38.5 mm
- 1/50 scale: 37.0 mm
Print with tree supports. Be very careful when removing them, especially around the camera.
PLA and lowest layer height recommended for high detail.
⚠ The model does not stand alone. If you are not going to glue it into your diorama, print the base. For example my organic base.
I look forward to your comments and photos of your creative projects.
Have a happy printing time 💛