Box for Skil Twist cordless screwdriver
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dimensions: Int = 225 x 95 x 57; Ext = 230 x 100 x 62
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 184
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
No supports needed
Holes in cover are for 6mm x 3mm (diameter x depth) magnets for magnetic closure.
Holes in bottom of box are meant for screws for magnetic closure. They are countersunk holes in with a diameter of 5mm at an angle of 45°. There are 2.5mm diameter holes under these.
I filled my box with EPP foam & cut out space for the screwdriver.
Holes in hinge are 2mm diameter - I used aluminium wire but I think 1.75mm filament should work too.
Printed with Prusa Mk4 in Sunlu PLA+ white filament.
There is some warping that can be seen in the picture (having bed adhesion issues with this filament that isn't solved even with glue stick)