1 / 2
QIDI Q1 Pro Belt Tensioner
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A belt tensioner for the QIDI Q1 Pro
- Rating
- 5 / 5
- Likes
- 42
- Downloads
- 218
- Makes
- 2
- Views
- 1,465
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I remixed the mount to fit on the Q1 pro (I shortened it by 8mm and tightened the holes a bit).
For easier remixing, I included a .step file for the mount.
Hardware required (per mount):
- 1 x M4 x 30mm screw (for the tensioning mechanism; I used a socket caps for minimum wear and tear)
- 2 x M3 x 16mm screws (for mounting on the Q1 Pro)
- 1 x M4 nut
The print settings I used:
- Material: eSun pa6cf
- Walls: 3
- Infill: 20% gyroid
- Layer height:
- First layer: 0.2mm
- Other layers: 0.16mm
- Top shell layers: 5
- Bottom shell layers: 3