1 / 2
Kickstand for Dell Latitude Rugged Extreme 7212 tablet — image 1
1 / 2

Kickstand for Dell Latitude Rugged Extreme 7212 tablet

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I didn't want to pay $50+ for a kickstand so I designed this one instead.

Rating
0 / 5
Likes
4
Downloads
129
Makes
1
Views
566
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

I didn't want to pay $50+ for a kickstand so I designed this one instead. Requires three screws, two O-rings, and two thread inserts.

Heat up the thread inserts and press them into the holes on the ends of the mount piece. Push screws through the holes on the stand piece and screw them through the O-rings into the thread inserts. Line up the mounting bar with the screw hole and two rectangular indents on the back of the tablet and screw it all in. Adjust the two side screws until it's as stiff as you like it. The "foot" on the stand has an indentation in it; cut up a large O-ring or similar material and superglue it into the indentation for extra grip.

Model is sized for M5 thread inserts, and I'm pretty sure the tablet takes an M4 screw for mounting, but I suggest bringing the tablet and mounting bar to a hardware store and finding the one that works best for you.

Tags