1 / 3
Stylish Shelf Bracket (remix)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Printed flat on the bed with no supports. The 3 holes for the wallmount are 5mm. The 2 holes for the shelf are 4mm. It has an overall dimension of 250 x 220 x 23mm.
Printed mine in Extrudr PLA NX2 Matt. In the pictures I used a 30cm wide and 2m long wooden board.