1 / 6
IKEA SOCKERBIT Wall Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fits for SOCKERBIT boxes 38x25x15cm and 19x26x15cm (38x51x30cm not tested). Box remains detachable. F3D included.
- Rating
- 3 / 5
- Likes
- 14
- Downloads
- 89
- Makes
- 1
- Views
- 777
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
I've used Extrudr NX2 PLA, but any other should do as well. Obviously no supports and stuff.
Infill is 20%, but increased to 100% around the screwholes - drop the 3MF into PrusaSlicer if you not want to fiddle around with this (or look it up for details).
Once printed, use a water level for drilling and while screwing stuff to the wall. I used 4.0 x 40mm and 5.0 x 25mm dowel. Holds well since a couple of month already…
Enjoy!