Leica pole mount to tripod
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.93 – €1.14 net (excluding VAT)
For file: Leica pole mount_0.4n_0.2mm_PETG_MINIIS_49m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.04 excluding VAT (range midpoint).
- Weight reported by the author
- 19 g
- Print time reported by the author
- 48.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Mount for fixate pole in tripod.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 76
- Makes
- 0
- Views
- 497
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
For safe mount base station without tribrach.
Mount for Leica pole (GLS12 or GLS13, 25mm diameter) and Leica tripod (GTS102-9, 60mm hole).
Print settings:
material: PETG
nozzle: 0.4mm
layer height: 0.2mm
perimeters: 4
top/bottom full layers: 7/6
infill: 15%
supports/brim: NO
note: STL is oriented to print