Brad Nailer Non-Marring Tip, For Dewalt DCN680
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.12 – €0.15 net (excluding VAT)
For file: tip_0.2mm_PETG_MK3S_10m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.13 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 10.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Non-marring tip to keep the metal from indenting on the wood.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 263
- Makes
- 2
- Views
- 698
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Simple non-marring tip to keep the metal from indenting on the wood. Once printed need to give it a couple of whacks to push the plastic piece on to the metal tip. Print settings I used: 0.2 mm, Prusament PETG, 0.4 nozzle, 15% infill, 3 perimeter. G code, stl, sldprt, .3mf attached. Works for: 20V brushless 18ga Brad Nailer, model number DCN680. This may work on other brad nailers.