Gameface Trion Replacement Priming Block
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement priming block for the Gameface trion that uses the original rollers, screws and pins!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
This is a replacement priming block for the Trion that only needs 3 of the original screws, and both rollers and pins!
When installing, remove the slamfire bar, it will not work consistently with the slamfire bar installed. You will lose the ability to slamfire, but you do get the ability to deprime.
Print both halves auto-oriented. You'll want some decent strength, so print accordingly. This print may or may not be friendly towards printers with poor tolerances.
Supports are only needed for the spots where the rollers go. Don't support the barrel-hole, it'll just make the print quality worse.