DeSalvo Galactic expansion for Pimoroni NVMe Base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bottom piece to house a Pimoroni NVMe Base (single slot) under the DeSalvo Galactic case for Raspberry Pi 5.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 80
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This is a bottom piece to house a Pimoroni NVMe Base (single slot) under the DeSalvo Galactic case for Raspberry Pi 5.
It attaches to the DeSalvo case using the M4 threads that is already there and will fit an NVMe drive with or without a heatsink of normal size.
Be aware that it only fits Pimoroni boards for single drives, the dual boards have a different layout.
I have included files that should make it fairly easy to modify and suit your needs however.
For me to be able to use existing materials I drilled out the screw holes in Pimoronis NVMe Base to fit M3 screws instead of M2,5.
Be aware that this might void any warranty so check functionality beforehand.
Mine works perfectly fine and I expect it would since I cant see any traces on the board nearby.
Another thing to mention is that the picture of it non-attached shows a slightly earlier revision and the attached piece has a cutout for the flex cable and the drive was replaced.
Picture shows a WD Black drive but these will not always work with Pimoronis board and I ended up replacing it for a Crucial P3 instead.
I used Prusament PETG Chalky Blue for my print.
To make this youll need:
DeSalvo Galactic case for Raspberry Pi 5
Pimoroni NVMe Base for Raspberry Pi 5 (single slot)
Pimoroni PCIe Flex Cable for NVMe Base and Raspberry Pi 5 (50mm long)
4pc M3 threaded inserts (the ones I used came from CNC Kitchen)
4pc M3 screws 8mm long
4pc M4 countersunk screws roughly 27mm long
Some rubber feet (optional)