1 / 2
Tapo C210 Adhesive Base
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple flat-bottom-adapter, for the stock Tapo C210 twist-lock plate.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 33
- Makes
- 0
- Views
- 327
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
Additionally Required Hardware
| M3 x 6 mm screws (ISO 4762, ISO 7380-1 or similar) | 2x |
| M3 hex nuts (DIN 934) | 2x |
| Adhesive tape (e.g. 3M VHB)¹ |
¹ 3M VHB is only rated for up to 38°C (100°F) which could be a problem, depending on your application.
Customization
Find the Fusion 360 and STEP files in the download section.
Print Instructions
Any material will work fine. If you plan on using the camera for monitoring a printer, be aware that it's only rated for up to 40°C, which can easily be exceeded when printing in an enclosure. Keep that in mind when choosing the adhesive as well.