Concrete Teapot Warmer for IKEA RIKLIG
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€15.65 – €19.13 net (excluding VAT)
For file: teapot_warmer_mold-1mm_thick_0.4n_0.15mm_PLA_MK4IS_14h41m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €17.39 excluding VAT (range midpoint).
- Weight reported by the author
- 274 g
- Print time reported by the author
- 14.69 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A 3D-printable mold for casting a concrete teapot warmer designed for the IKEA RIKLIG with a built-in tea light holder.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 49
- Makes
- 0
- Views
- 334
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This is a 3D-printable mold for casting a concrete teapot warmer designed to fit the IKEA RIKLIG teapot. The stand not only provides a stable base for your teapot but also features a built-in space for a tea light candle, allowing you to gently keep your tea warm while you enjoy it.
You only need to print the mold of course, but I'm including the model of the warmer as well, if you want to use it for something (probably not for use with candles).
There are two mold models 1.5mm and 1mm. I have only used the 1.5mm version, but I think 1mm would work even better. If I ever decide to build another one I will use the 1mm version and update this description.
I printed it with supports everywhere and support blockers inside the mold where the concrete goes. Put your support spacing to at least 5 mm, otherwise you will waste a lot of plastic for nothing.
Make sure you are blocking the supports here: 

I printed it in PLA and used 1.5kg of artistic concrete to fill it up.
After 24 hours I removed the modl using a heat gun and pliers. It tool me almost 4 hours to get the mold off. That is why I think having the walls 1 mm thick would be much better, because the removal will be much shorter.
The finished concrete stand is pretty good. However, once it gets stained by tea it practically impossible to clean the stains, so maybe some surface finish would be usefull. I have not painted it so far.
