Ikea LACK Table Joiner
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.74 – €2.12 net (excluding VAT)
For file: Lack_Bracket_0.3mm_PETG_MK3S_1h37m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.93 excluding VAT (range midpoint).
- Weight reported by the author
- 33 g
- Print time reported by the author
- 1.61 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a simple joining bracket for stacking IKEA Lack tables.
- Rating
- 5 / 5
- Likes
- 81
- Downloads
- 233
- Makes
- 2
- Views
- 5,531
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple bracket to join together IKEA Lack tables. It is printable with no supports and 0.3mm layer height with 20% infill is fine.
Included 2 x countersunk holes to enable screwing to the legs of the upper table in the stack with 8g screws, and then the bracket and table just sits on top of the lower table.
The bracket file includes an easily removable internal brim to help bed adhesion and easily tears out.
This may be similar to other LACK table brackets, but this is my own design version
Note: I plan to release the files for the Lack enclosure shown in the photo soon. This is an extended height version of the Prusa Lack enclosure, but is high enough to have spools mounted inside the enclosure above the printer, AND is is sculpted around the PSU so the PSU is outside of the enclosure without having to remove it.