1 / 1
2U Rack mount for 2.5" SATA drives (16x)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed as part of my 2020 Extrusion rack, this is a mount for two 80mm fans, and sixteen 2.5" SATA drives (SSDs).
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 41
- Makes
- 0
- Views
- 377
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- GNU General Public License v3.0
You will need the following hardware:
- 12x M3 8mm Socket Cap screws
- 4x M3 25mm Socket Cap screws
- 16x M3 nuts
The fan mount holes are sized for M3 screws to be consistent, but will probably need adjustment for larger screws.
The ears are symmetrical, so you will need to print two of those.
I printed at 0.15mm layer height, no supports.