Valentine's (Vorontine's) Keychain Locket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic closing locket
- Rating
- 5 / 5
- Likes
- 50
- Downloads
- 79
- Makes
- 2
- Views
- 1,183
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- GNU General Public License v3.0
This is a fun little print to carry a small keepsake with you wherever you go. Print it, tuck in a tiny note, a photo, or something meaningful, and gift it to someone special—or keep it for yourself!
The locket consists of two parts that snap together securely. The front features a customizable design that can be printed in different colors with filament swaps, or left blank for a minimalist look. If you'd like to personalize it further, a source (.step) file is included for easy modifications.
BOM:
1 of keychain
4 of 6x3mm magnets
1 of M2x10 self-tapping screw
Assembly:
Insert the magnets into the printed parts, making sure to alternate their orientation so the locket twists freely without getting stuck halfway. Once the magnets are in place, screw in the M2 screw to allow the latch to twist smoothly.
Happy Printing!
These are the recommended print settings:
Material: ABS, PLA
Layer height: 0.2mm
Extrusion width: 0.4mm
Infill percentage: 40%
Infill type: grid, gyroid, honeycomb, triangle, or cubic
Wall count: 4 Solid top/bottom layers: 5