1 / 7
Tyrell Corporation Tuff Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A pelican style case for Blade Runner Optical Viewer from Jon-A-Tron and Empiricus.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 15
- Makes
- 0
- Views
- 113
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial
This is for either a multi-colour printer or a single colour printer using the method as shown here. The case top is a multi part print.
Using this method I still had to edit the G-Code to comment out lines that included T1 commands.
I printed this at 0.3mm layer height with a 0.4mm nozzle FACE DOWN
This is designed to print without support.
You'll need 2mm diameter closed cell foam for the seal and 3mm brass rod for the hinges and latches. The foam insert can be hot wire cut or use the precut style