Childproof Drawer Safety Lock - Hook and Latch (Shortened Height and Extended Latch)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.18 – €0.22 net (excluding VAT)
For file: childproof_safety_extended_latch_0.3mm_PLA_MK3S_13m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.20 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 13.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Hook and latch safety lock with shortened height for low clearance drawers and extended latch to reduce opening width.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 2
- Views
- 432
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
A simple hook and latch drawer lock to prevent prying toddler hands from opening drawers and accessing their contents. Few other drawer locks work for my drawers, which are mounted into a face frame and have drawer fronts with narrow clearances for locking hardware. This latch allows drawers to be opened to 1-3/8" (35mm), which is about the minimum amount of room needed to push the hook aside.
I printed these with PLA with 0.3mm layer height, 8 perimeters, and 100% infill and they have held up nicely to some relatively strong tugs.
Custom latches can be made by altering the parameters in the OpenSCAD customizer.
