1 / 4
Rad für Modellflugzeug 122x50 - RC-Airplane wheel 122x50 — image 1
1 / 4

Rad für Modellflugzeug 122x50 - RC-Airplane wheel 122x50

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

1:1 Ersatzrad für den FMS-Kingfisher - 1:1 Replacement for FMS-Kingfisher

Rating
0 / 5
Likes
7
Downloads
55
Makes
0
Views
329
Reviews
0

Updated at source:

Model information

License
GNU General Public License v3.0

Da die Originalräder vom FMS-Kingfisher steinhart sind, habe ich ein neues Rad gemacht welches weicher ist. Mit den 4mm Naben sollte das komplette Rad das Originalrad 1:1 ersetzen. 

Pneudurchmesser 122mm

Pneubreite 50mm

 

Dazu gibt es auch einen passenden Ski: https://www.printables.com/model/1185054 

-----

As the original wheels of the FMS-Kingfisher are rock hard, I made a new wheel which is softer. With the 4mm hubs, the complete wheel should replace the original wheel 1:1. 

Pneu diameter 122mm

Pneu width 50mm

There is also a matching ski available: https://www.printables.com/model/1185054 

 

Details zu den Dateien - File details

nabe_2-6mm
==========
Material PLA
Symmetrische Universalnabe
Achsbohrung 2mm. Die Nabe ist aber so dimensioniert, dass die Bohrung nach Bedarf auf bis zu 6mm erweitert werden kann. 
Wenn die Achsbohrung grösser gemacht werden soll, muss ggf rund um die Bohrung der Infill auf 100% erhöht werden.
-----
Symmetrical universal hub
Centre bore 2mm. However, the hub is dimensioned so that the bore can be enlarged to up to 6mm if required. 
If the axle bore is to be made larger, the infill around the bore may have to be increased to 100%.


nabe-aussen
nabe-innen
===========
Material PLA
1:1 Ersatz für die Original Kingfisher Nabe. 
Achsbohrung 4mm.
-----
1:1 replacement for the original Kingfisher hub. 
Axle bore 4mm.


pneu
====
Material Varioshore.
Für einen Pneu braucht es 2 Hälften. Die beiden Hälften mit einem flexiblen Kleber zusammenkleben.
-----
You need 2 halves for one tyre. Glue the two halves together with a flexible adhesive.


montagehilfe
============
Material PLA
Hilft die beiden Pneuhälften während dem Verkleben optimal auszurichten. 
-----
Helps to optimally align the two tyre halves during bonding.

Tags