50ml cup (non-food use)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.78 – €0.96 net (excluding VAT)
For file: cap_50ml_0.2mm_structural_0.4n_0.2mm_PLA_COREONE_43m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.87 excluding VAT (range midpoint).
- Weight reported by the author
- 14 g
- Print time reported by the author
- 43.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a handled cup with 50ml capacity. Please do not use for food.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 51
- Makes
- 1
- Views
- 146
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
I designed this cup for portioning detergens.
Please keep in mind that this should not be used for food.
Ive replaced the original model with a sturdier version since I managed to break the cup this morning.
Changes:
increased overall wall thickness from 1,2mm to 1,67mm for an extra perimeter when printing with a 0.4mm nozzle
wider handle now with stronger connection to the cup itself
larger radii in the areas experiencing bending stress
Edit:
There is an even sturdier version available now because it broke (again) ...