1 / 4
ORICO M.2 SSD enclosure quick release mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Dual-Bay casing available:
https://www.printables.com/model/1190688-dual-bay-orico-m2-ssd-enclosure
Assembling Instructions
Prepare a micro switch with lever:
Put slider and slider cover in place, glue the cover in place with super-glue:
Glue the micro switch in place with super-glue:
The lever should touch the outer casing:
Prepare PCB from the ORICO M.2 enclosure M2PV-C3:
Install the PCB in place:
Cut thermal pad which came with the SSD enclosure, put 1 layer on top of the chip, and 2 layers on the back.
Install the original heat sink, tighten the screw at the back with the original screw:
Test slider movement
ON position:
OFF position:
