Grogu HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Standard Digital File License
AI art, then used HueForge v0.8.1 to create the model.
- Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
- Model size is 150x200mm
- Do not adjust the height (Z) in your slicer! The layers would not be correct. You can only modify the X and Y dimensions.
- You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 2.2mm and the Actual Depth is 2.2mm
It is possible to print without AMS by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support.
These were my settings and colors for my print that you see in the picture. Your results may be depending on the filament you use.
Filaments Used:
PLA Elegoo+ Black Transmission Distance: 0.3
PLA Sunlu META Grey Transmission Distance: 3.6
PLA Elegoo + Gray Transmission Distance: 3
PLA Elegoo + White Transmission Distance: 6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Grey
At layer #13 (1.12mm) swap to Gray
At layer #17 (1.44mm) swap to White for the rest.