1 / 8
Hot Air Rework Station Nozzle Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Uses TPU rings to squeeze against nozzles and hold them securely. Includes options for 4, 6, or 8 nozzles.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 23
- Makes
- 0
- Views
- 269
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
Sized for standard 1" ID nozzles, like the Atten ST-862D. Wall-mounts with a single screw hole (sized for #10 screw).
Options:
- Includes holders for 4, 6, or 8 nozzles.
- Includes .f3d file so you can modify as needed.
- You can press-fit the TPU rings onto the plastic base, or add a dab of CA glue to make sure they never pop off.
- Adjust parameter of bumper OD if you want a tighter or looser fit.

Instructions:
- Print plastic base upright, no supports needed.
- Print TPU with settings to ensure the right amount of squish:
- 2 bottom layers
- 2 top layers
- 2 perimeters
- 0% Infill
