1 / 5
Crucarta Backspacer PM2 - Flush
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified backspacer for the Crucarta PM2. The crucarta variant has different liners and scales, so this fills the gap!
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 40
- Makes
- 0
- Views
- 261
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Modified backspacer for the Crucarta PM2. The crucarta variant has different liners and scales, so this fills the gap in between where the liners are cut out. This was printed in PLA, but you can use almost any material as this is not a high wear item. This is a snug fit item, make sure that you fidget with it when installed to get everything totally flush!
Printed at .12 layer height with a .4 nozzle. I would use this or lower, not anything higher.