1 / 2
Voron 0 Fysect UCAN mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for a Fysect UCAN board
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 24
- Makes
- 0
- Views
- 195
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement for the motor panel of the Voron 0 with a mount for 2x WAGO 221 and a Fysect UCAN board. You can use two zip ties to hold the bowden and umbilical cable in place and a second one to fix the umbilical to the part (strain relief).
Nothing is needed except a few screws (M3x4, M3x6 might work) and heatset inserts.
Use the two Wago for 24V and ground, the Can H and Can L can be connected from the UCAN.
It's designed as multi color print but you can just delete the red part from the file in your slicer to make it single color