1 / 5
Wheel stilet caps Chevrolet Niva/ Колпачки на гайки шпилек колеса — image 1
1 / 5

Wheel stilet caps Chevrolet Niva/ Колпачки на гайки шпилек колеса

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

3D model of caps per nut of stilettos m12 wheels Chevrolet Niva

Rating
0 / 5
Likes
10
Downloads
87
Makes
0
Views
631
Reviews
0

Updated at source:

Model information

Category
Garage
License
Creative Commons — Attribution

EN

The case printed ABS+ from ESUN. The emblem of Chevrolet made of transparent yellow Petg, glued with cyanoacrylate glue, covered with varnish.

I recommend printing the case either ABS+, but not from Esun (it is too soft, traces of the key, during the first removal, have already remained on the case) composite ABS, or another composite.

Petg in question is how he will behave in the summer.

Pla definitely not.

RU

Корпус печатал Abs+ от Esun, вставка шильдика прозрачный желтый petg, вклеивал на цианакрилатный клей, покрывал лаком. 

Рекомендую печатать корпус либо ABS+, но не от Esun(слишком он у них мягкий, следы от ключа, при первом снятии, уже остались на корпусе) композитным ABS, либо другим композитом.

Petg под вопросом, как поведет себя летом.

PLA точно нет.

Tags